About this Document
This document explains the standard installation of an EP1plus on a Passenger Van.
Updates: For the latest version, please visit: childcheckmate.com/installPV Mobile: This document is available on your phone, tablet or PC. Download: You can also download the document as a PDF. Print: For best results, print the PDF double-sided with two sheets per page.
Installation: EP1plus Passenger Van
Last Modified: {{date:MMMM d, yyyy}}
Installation RVT (Deactivation Button)
Installing an EP1plus on a Passenger Van Overview The EP1plus Systems are recommended for Passenger Vans. Installation: Mounting the EP1plus Module Locate a convenient mounting area for the EP1plus Module within the drivers' area of the vehicle. Tech Tip: Before securing the unit, check to ensure that its location is central enough, so that the plug leading from the wires can easily reach it. Secure the unit using the two-sided tape provided. Once mounted, screws may be applied to the holes located at each end of the unit. Installation For installation instructions, please click on the links below: Operational Check-List Upon starting the vehicle, the EP1plus Module will emit an audible tone, indicating that the System is now operational. Activate the System, this will vary depending where the Brown Wire (6-PH Wire #5) is connected to. Tech Tip: The Brown Wire (6-PH Wire #5) is the activation wire for the Main Alarm Unit. Connect this wire to a +12/24V signal source that becomes +12/24V when the driver picks up children. Turn the ignition 'OFF'. The System's alarm, a high-pitched beep, will begin to sound. After approximately 8 seconds, the vehicle Horn will begin to sound 'ON' and 'OFF'. Turn the ignition back to the 'ON' position. The EP1plus Module will sound a high-pitched tone 3 times at 30 second intervals reminding the driver to perform their Child Check. Proceed to the rear of the vehicle and depress the RVT for at least 3 seconds. You will hear a deactivation signal from the EP1plus Module. The System is now deactivated and the key can be removed safely from the ignition.
Schematic of EP1plus Module on a Passenger Van
Installation 6-Pin Wire Harness
Installation: RVT (Deactivation Button)
Text
Installation: 6-Pin Wire Harness
Popular Links & Next Steps
+1-613-835-2489 +1-877-494-8222
www.childcheckmate.com
Contact Us
Online Store
Technical Support technicalsupport@childcheckmate.com Sales sales@childcheckmate.com
Support Forum
Child Check-Mate System, Inc. P.O. Box 70 Navan, ON Canada K4B 1J3