About this Document
This document explains how to put the System into Diagnostic Mode.
Updates: For the latest version, please visit: childcheckmate.com/infodiagnostic Mobile: This document is available on your phone, tablet or PC. Download: You can also download the document as a PDF. Print: For best results, print the PDF double-sided with two sheets per page.
Info: EP2/EP2plus Diagnostic Mode
Last Modified: {{date:MMMM d, yyyy}}
Diagnostic Mode Overview To assist the technician in troubleshooting the Main Alarm Unit or to determine what program is loaded into the units, the System must be in Diagnostic Mode. Follow the steps below, in the order listed to properly diagnose the System. The audio prompt requires the external Speaker to function (exclusively available from Child Check-Mate). EP2/EP2plus Entering Diagnostic Mode Cycle the 'ON'/'OFF' key 3 times quickly. The EP2/EP2plus will sound the program currently stored in the memory and the external Speaker will say, “Diagnostic Mode.” Testing the System Setup and Wire Connections To test the Inputs for the System, you must turn 'ON' the corresponding Input and the System will indicate the Input was activated. Yellow Ignition Wire Turn the ignition to the ‘ON’ position, the System will emit a tone and the external Speaker will say, “Ignition ON.” Brown Activation Wire Turn 'ON' the source for the activation (this is installation dependent, but would normally be the Red overhead flashing lights). The System will emit a tone and the external Speaker will say, “Child Check-Mate is activated.” Grey Brake Light Wire Once the Brake Lights are activated, the System will emit a tone and the external Speaker will say, “Brake Input Activated.” Blue Deactivation Wire Once the ignition is turned ‘OFF’, the EP2/EP2plus will emit tones. Turn the ignition back to the ‘ON’ position and press the RVT. The System will sound quick tones and the external Speaker will say, “Child Check-Mate is Now Deactivated.” Note: If you have an EP2/EP2plus that deactivates in the ‘OFF’ position leave the key in the ‘OFF’ position and press the RVT. The System will sound quick tones and the external Speaker will say, “Child Check-Mate is Now Deactivated.” Once all the Inputs are activated and functioning is confirmed, the System will emit a tone and the external Speaker will say, “Child Check-Mate Self-Check Confirmed.” Motion Sensor The light on the Motion Sensor will stay 'ON' until the Motion Sensor is fully powered up. Once the light on the front of the Motion Sensor turns 'OFF', it will search for motion. To determine if it installed correctly and once the Motion Sensor sees 2 motions within 15 seconds the external Speaker will say, “Motion Sensor Activated.” After 45 seconds if the EP2/EP2plus does not receive a signal from the Motion Sensor (that detects movement), the external Speaker will say, “Motion Sensor Not Working.” Tech Tip: To check the Motion Sensor the ignition needs to be turned 'ON'. Important: The Motion Sensor diagnostic will apply if the System is programmed to expect Motion Sensor Input.
Installation: EP2plus Module
Text
Popular Links & Next Steps
+1-613-835-2489 +1-877-494-8222
www.childcheckmate.com
Contact Us
Online Store
Technical Support technicalsupport@childcheckmate.com Sales SALES@childcheckmate.com
Support Forum
Child Check-Mate System, Inc. P.O. Box 70 Navan, ON Canada K4B 1J3